|
Sensor should protrude
just enough to touch the Liner. Liner not yet installed. |
Install Through The Wall Fitting in top
hole closest to room wall.
|
Insert Black Pipe and Cap from outside. This is only used for optional
items. Otherwise closed.
|
|
Vinyl Front Protector. Now clear vinyl.
|
To install Liner drape
over the Rear, Sides and Front. Use Clips as shown to hold Liner. |
Use toes to hold Liner in corners then adjust Clips on top of Walls to
hold Liner.
|
|
This helps aid installation of Liner.
|
Cutting Holes for Fittings: Again hold Liner at corners with toes and
hands to make pie shaped cuts for holes where there are already Holes
in Rear.
|
Detail of pie cuts, cut within a quarter of an inch from the inside of
the Hole edge.
|
